Tel: +86 18103710497
Email : admin@feedsunshine.com
Whatsapp: +86 18103710497
Address: No. 1, sunshine Avenue, Ji- cheng Industrial Park, Xinxiang City.
Power: | |
---|---|
Weight: | |
Size: | |
Warranty:: | |
SKU: | |
Availability: | |
Quantity: | |
ZC450
Product Description
product description
Sunshine Industry ZC450 biomass wood pellet machine uses corn stalk, straw, peanut shell, corn cob, cotton stalk, soybean stalk, weeds, branches, leaves, sawdust, bark and other solid waste as raw materials. It is crushed, pressurized and compacted by a granulator. Then it becomes a small rod-shaped solid particle fuel.
The biomass wood pellet machine adopts a vertical design and uses gravity as the main power for the material to pass through the machine.
The biomass wood pellet machine has a low die with a series of rollers on the die. As the material enters from the top feed port, it is compressed between the rollers and the die.
Details are as follows:
MODEL NO | OUTPUT(KG/H) | POWER(KW) | PELLET DIAMETR(MM) | SIZE(MM) | WEIGHT(KG) |
ZC200 | 100-120KG/H | 7.5KW | 2.5-10MM | 1000*450*850MM | 350KG |
ZC250 | 200-200KG/H | 15KW | 2.5-10MM | 1200*550*1050MM | 550KG |
ZC300 | 250-300KG/H | 22KW | 2.50-10MM | 1250*600*1100MM | 750KG |
ZC350 | 400-500KG/H | 30KW | 3-25MM | 1650*700*1300MM | 1000KG |
ZC450 | 600-700KG/H | 37KW | 3-25MM | 1300*700*1500MM | 1450KG |
The flat die sawdust pellet machine is mainly used for the compression molding of crude fibers, such as corn stalk scales, rice husks, cotton stalks, weed stalk scales and other crops such as sawdust, domestic waste, and factory waste. The adhesion rate is low and it is difficult to form. Material granulation, farmer, farmhouse feed pellets, can also be used for biological
1) The bearings and oil seals used in the transmission part adopt high-precision bearings imported from Japan and wear-resistant and heat-resistant fluororubber oil seals imported from the United States. In addition, a lubricating oil return system is specially added to ensure full lubrication and safe and reliable operation of the bearing.
2) The particle forming system used in the bearing is a high-quality silent bearing, and a butter circulation cooling and lubrication system is added, so that the bearing has a longer service life and safer operation.
3) The pellet machine mold is made of high-quality alloy steel, and the unique compression ratio design is reasonable, so that the product quality is better, the service life of the ring die is longer, and the production cost is reduced.
Low temperature granulation of bacterial fertilizer, organic fertilizer and compound fertilizer. The motor drives the main shaft of the machine to rotate after the speed change of the reducer, the main shaft is connected with the pressing roller shaft, the mold is stationary, the pressing roller and the mold material rub and rotate, the material is pressed out through the mold, and the cutter is cut and pressed.
The material then falls into the unloading tray, and is thrown into the hopper of the machine, and the granulation is completed.
Features
Biomass Sawdust Pellet Machine
It is made by extruding sawdust, straw and other raw materials under normal temperature conditions by using a pressing roller and a ring die.
The density of the raw materials is generally around 0.6-0.8, and the density of the formed particles is greater than 1.1, which is convenient for transportation and storage. At the same time, its combustion performance is greatly improved, reducing human dependence on petrochemical energy and atmospheric emissions.
Two-layer mold, dual-use, high-yield and energy-saving.
Independent lubrication, high pressure filtration, clean and smooth. Independent frequency conversion device to ensure particle formation rate.
Company Profile
Henan Sunshine Industry Co., Ltd. specializes in the production of feed equipment (including poultry feed, ruminant feed, aquatic feed, pet feed) and biomass pellet equipment. Our products have been highly recognized by customers in the United States, Canada, Europe, India, South America, Southeast Asia, South America and other regions. We attach great importance to reputation and contract, and have won the market and won the praise of domestic and foreign customers. The company always adheres to the quality of customer service.
Plywood crate or iron crate for efficient flat die sawdust pellet machine
Technical Service:
1.Design for production line flow and equipment layout freely according to the site.
2.Supply the foundation drawing of equipment and drawing of parts made by buyer
3.Supply the technical parameters of peripheral equipment.
4.During the operation,we can offer the technology service freely if the user needs to adjust the layout and application.
5.During the operation, we only collect the cost if the user willing to upgrade the equipment when we have the advantage technology.
After-sales service
1. During installation and debugging, send technicians to the site to guide installation and debugging.
2. During the installation and commissioning process, we provide training services
3. The quality assurance date is one year after commissioning.
4. If the equipment fails due to improper handling by the user, we will be responsible for the maintenance and charge the corresponding fee.
5. We provide components with favorable price, lasting maintenance. After the quality assurance period, if the equipment needs to be repaired, we only charge the cost price.