The feed pellet machine has been widely used now, and it is an indispensable thing for farmers, which brings great convenience to farmers. In order to prolong the service life of the feed pellet machine, we usually need maintenance. Today, let’s talk about how to prevent the bad phenomenon of the feed pellet machine.

If the particles have cracks, a lot of dust, and the output is still low, it is very likely that the quenching and tempering temperature has not been reached, resulting in poor maturation of the raw materials. At this time, it is necessary to increase the quenching and tempering temperature. Another possibility is that the position of the blade is too far or the blade is too blunt. You can adjust the position of the blade or replace the blade. The surface smoothness of the particles is good, but the particles are too hard, it may be that the compression ratio of the ring die is a bit high, and the compression ratio of the ring die needs to be reduced. If the surface smoothness of the particles is not good and there is a lot of dust, it is the opposite of the above, because the compression ratio of the ring die is small, and the compression ratio of the ring die needs to be increased.