The wall of the ring die is too thin, so that the strength of the ring die is not enough, and the phenomenon of die explosion will occur during production. At this time, the thickness of the ring die and the pressure relief hole should be increased under the premise of ensuring the effective length Read More

1) Clean the gate on the top of the silo every week to avoid delays in feeding due to blockage2) Clean up the residue on the barrel wall once a week3) Clean up the residual material at the connection between the feeder and the inlet regulator once a week4) Clean the water nozzle and steam nozzle eve Read More

Structural principle of feed pellet machine:1. Avoid picky eaters. The compound feed formula has various raw materials and comprehensive nutrition, which prevents animals from picking their favorite food from the powder and refusing to eat other ingredients. 2. High feed return rate. During the gran Read More

Check whether the raw materials are consistent. Refer to the low four materials for pellet production.1. Insert the plug of the machine and press the power button. The engine should start and the mold turning.If the engine does not turn, immediately press the stop button and check or investigate the Read More

1. Selection of extrusion methods There are mainly two extrusion methods: dry extrusion and wet extrusion. Which one to choose depends on the actual situation. First of all, it depends on the function of the extruder you are using. At present, we are using Henan Sunshine Industrial high-efficiency e Read More

The pellet mill is the main equipment in the production process of every feed mill, and it can also be said to be the heart of the feed mill. The correct use of the pellet machine directly affects the economic benefits of the feed mill. Therefore, how to correctly use and maintain pellet machine mac Read More

1. Raw materials for weaned puppies From raw materials: Corn 20%, broken rice 15%, bran cake 15%, flour 5%, bean cake 14%, wheat bran 14.5%, vegetable cake 5%, fish meal 6%, bone meal 5%, salt 0.2%, Vino fur animal variety Vitamin 0.1%, Vinomycoqingdumineral 0.1%, Vinocomplex probiotics 0.1%. 2. Raw Read More

Check whether the raw materials are consistent. Granular production is carried out with reference to low four materials. Plug in the machine and press the power on button. The engine should start and the mold should rotate.If the engine does not run, immediately press the stop button and check or in Read More

1. FeidaThe feeder consists of a screw shaft, a casing, a cycloid reducer, a variable speed motor, a bearing with a seat, and a full-face screw pick. Pitch is variable. The screw shaft is driven by the cycloid reducer, frequency conversion motor and chain drive to rotate the screw shaft to realize t Read More